Quick recap.
Cut, grind, template, transfer, trial, prime steps completed. Now final clean and weld in.
Most panels areas required another trial and also to remove, clean the weld areas. Then a few holes or flange edges to ensure a good fit then tacked into place and then final weld.
There are not loads of photos in this section as I spent most of my time under the van welding and grinding to take photos!
All I can say is that welding upside down under a van with a welding helmet is hard!
But welding i find is strangely addictive!
After all welds are completed and have been ground down... next step finals painting
Stay tuned for Bodywork - Part 6 - Painting
No comments:
Post a Comment